Versatility and operational flexibility are the main characteristics of Dieci telehandlers and of its other vehicles, thanks to the adoption of special technological expedients and quality components, they are perfect as they guarantee extreme performance as required for works in mines, quarries and tunnels.
With the wide range of telehandlers you will always have the right vehicle to perform maintenance work on conveyor belts, chain devices, ventilation systems, and cope with the many unforeseen needs that can occur everyday in these activities.
While, the giant dumpers, designed expressly for mine work, allow important loads and are absolutely unique for their strength and manageability.


One of the primary activities for man, which began even before agriculture, is the mining of minerals from mines and quarries. Although it consists in an activity with a high environmental impact, it constitutes the foundation of all other productive activities and, consequently, of the development and well-being of our society.

There are four basic mineral extracting methods: from mines or from open-pit quarries, which are the most common; or from underground mines and quarries which are accessed through shafts or tunnels; the last method is the extraction of minerals and fuels through boreholes.

The difference between mines and quarries basically depends on the material “cultivated” (in mining cultivation is the systematic exploitation of quarries and mines): metal ores, precious stones, refractory products and fuels are extracted from mines; marble, ornamental stones and building stones such as sand gravel, and peat are extracted from quarries.

Whether quarrying, mining or tunneling, these activities have in common: the extreme conditions, the dangerousness and the harshness of the work.

Dieci’s experience gained in these sectors, and the continuous feedback with its customers, has allowed to develop over time a series of special machines and equipment specifically designed for this type of activity: heavy, extreme and dangerous.

Versatility, power, compact dimensions, fluidity of movements, ease of use and dedicated technical solutions guarantee the best results in extreme conditions.

The Dieci Research & Development Centre is constantly working to find the best aesthetic and ergonomic solutions: the end result is the perfect synthesis of style and comfort.

Fixed telehandlers






Pivot steer telehandlers


Rotating telehandlers


Construction vehicles


Underground mines

In every mining plant, handling and maintenance operations are always burdensome, as they take valuable time away from production processes.
Dieci will always be ready where heavy machinery is used, to provide ideas, means and equipment capable of carrying out and speeding up all the necessary operations: telehandlers for moving people and objects, agile and compact truck mixers that are perfectly suited to work in tight spaces, powerful dumpers for material disposal operations.

Open-pit mines and quarries

Routine maintenance operations become truly titanic enterprises in open-cast mines and quarries if the appropriate equipment is not available.
With the use of Dieci telehandlers and equipment, these operations will be speeded up and simplified. The natural versatility that has always characterized Dieci’s vocation has made it possible, over the years, to create specific equipment for every type of intervention: cylinder maintenance, pneumatic devices disassembly, pipe handling for piling, transport and loading of semi-finished marble slabs. The handling of heavy and bulky loads has now become the normality for Dieci vehicles.


The construction of tunnels can also be assimilated to the mining activity as regards the type of work. Tunnels are excavated within the mountain reliefs to improve road and rail network connections. Also in this sector, as a result of Dieci’s experience and the versatility of its vehicles, telehandlers are used as multipurpose vehicles for different applications.
Certain characteristics, such as boom length, lifting power, mobility and the possibility of rotation, make the Dieci vehicles ideal when equipping tunnels, when energy, lighting, communications and above all forced ventilation ducts have to be installed, which are essential many kilometers away from the tunnel entrance.

Technical solutions

Self-levelling outriggers
A number of telehandler models are equipped with self-levelling outriggers, which help to keep the vehicles stable on uneven ground and make them ideal for reinforcing rock faces.

Additional ventilation filters
These additional filters are added to the cabin ventilation system to prevent the operator from breathing potentially harmful substances.

Certified “explosion-proof” vehicles
The specialised vehicles of the dedicated tunnelling line are “explosion-proof” certified, enabling them to operate underground.

Specific equipment
Gripper for cylinders

This gripper has been designed to handle various types of cylinders. The possibility of rotating and tilting makes it indispensable in maintenance operations of large machinery such as dumpers and mine excavators.

Gripper for tires

This gripper has been designed to handle various types of tires. The possibility of rotating and tilting even large tires becomes an easy and fast operation.

Centring handler

This equipment was designed specifically to position the centring arches that will form the tunnels supporting arches. The possibility of tilting maximizes the precision in laying operations. The centring handler can be adjusted to adapt to the different types of arches.

Gripper for pipe

Equipment designed to handle pipes of different lengths and sections. It is mainly used in the oil industry and environmental remediation.

Passenger Basket

The Dieci range of passenger baskets can satisfy any need: front basket, removable front basket, basket with trilateral hydraulic rotation, basket with positive-negative jib to allow the operator to descend below the vehicle walkable surface; in addition, a basket designed specifically to operate in tunnels, with trilateral hydraulic rotation and protective roof is also available.


Apollo is the fixed boom telehandler for industry and construction offering excellent features, outstanding versatility and optimal handling: it is the “mini handler” designed for confined and difficult spaces.
The wide range of accessories that can be installed on this vehicle: lifting hooks, clamps of various types, excavation and aggregate buckets, winches and baskets make it a multi-purpose vehicle.
The cab is ROPS – FOPS approved, very wide for telehandlers of this category, it guarantees a high level of comfort. The door is produced with an innovative material, DSCS, an ultra-light and extremely insulating composite both in terms of atmospheric conditions and noise. The result is a cab with enhanced comfort and habitability.

  • ROPS – FOPS approved cab
  • Door in DSCS (Double Skin Composite System)



The DEDALUS telehandler models are particularly suitable for use in road maintenance works, in town centers and in undergrounds.
A small and compact vehicle, produced with increasing capacities and lifting heights, that stands out for its handling, power and precision characteristics and for its great fluidity of movement.
This telehandler can be equipped with the new FNR Joystick, which thanks to the simple movement of a hand manages all the work functions of the vehicle, increasing its safety and precision.
The cab is ROPS-FOPS approved and can be fitted with an enhanced air conditioning system that allows perfect air circulation inside the passenger compartment.
All the vehicle’s operating parameters are monitored by an on-board computer with LCD display.

  • New CAN-bus single-lever joystick
  • 2-speed Hydrostatic Transmission
  • New FNR Joystick – optional
  • ROPS – FOPS approved cab
  • Available with the new Giugiaro Design cab



ICARUS telehandlers is a family of vehicles particularly suitable for large jobs in the construction and industry sectors, thanks to its great strength, power and lifting heights.
The engine hood has been designed to reduce the noise emission and optimize heat dissipation, furthermore, since it has to operate in workplaces which are often dusty, the ICARUS is equipped with separator pre-filter applied to the air filter, which prevents the entrance of dust and abrasive particles, allowing greater efficiency and longer engine life.
The cab, ROPS-FOPS approved, is very comfortable, the air conditioning system can be enhanced on request and it is possible to fit the new seats with automatic suspension.

  • ROPS – FOPS approved cab
  • Separator pre-filter applied to the air filter
  • Available with the new Giugiaro Design cab



SAMSON telehandlers are robust and powerful vehicles, these characteristics make them particularly suitable for heavy and intensive work both in the construction and industrial sectors, for operators who need a large lifting capacity.
It is particularly suitable for loading and unloading heavy materials, thanks to its swing kinematic mechanism equipped with counter-lever, which allows to considerably increase the rotation angle of the fork carrier plate particularly effective if combined with the use of the bucket.

The air conditioning system can be enhanced and the cab is ROPS – FOPS approved, the on-board computer is equipped with LCD display.

This range of telehandlers can be equipped with VS Vario System EVO2 transmission with 4 driving modes: Automotive” “Loader” “Creeper” and “ECO” and a Proportional 4 in 1 Joystick combined with a “Load Sensing” variable displacement pump, which increases the movement speed and allows to carry out up to 4 simultaneous movements.

  • ROPS – FOPS approved cab
  • VS Vario System EVO2 transmission
  • Proportional 4 in 1 Joystick
  • “Load Sensing” variable displacement pump
  • Enhanced cooling system
  • Digital speedometer
  • Available with the new Giugiaro Design cab



These models are construction telehandlers that combine power and agility to handle heavy loads in tight spaces. ZEUS is equipped with hydrostatic transmission combined with pedal “INCHING” command, that allows the vehicle to run at slow speed also with engine at full throttle.
The swing kinematic mechanism is equipped with a control that allows to considerably increase the rotation angle of the fork carrier plate. Furthermore, the extension cylinder is located inside the boom. These features make it comfortable and safe for loading and unloading operations. Designed to work on construction sites, the cab is equipped with all the safety devicesROPS-FOPS approved and prearranged for enhanced air-conditioning where there are difficult weather conditions, new seats with automatic suspension can be fitted on request.

  • ROPS – FOPS approved cab
  • “Inching” pedal control
  • Hydrostatic transmission
  • Enhanced air conditioning system – optional
  • Available with the new Giugiaro Design cab



PEGASUS is a rotary telehandler, its rotation can be either continuous (360°) or non-continuous (400°). This telehandler can be fitted with a wide variety of accessories that make it suitable for many jobs, a single vehicle can operate as a telehandler, an aerial platform and a crane.
The Pegasus /400 ° model, designed specifically for the rental market, has a non-continuous 400 ° rotation, its main features are ease of userobustnessreliability and a complete range of safety features, including a load limiting device plus advanced instrumentation to ensure total control of the vehicle irrespective of force, load, ground conditions and speed.
The Pegasus continuous rotation on 360°, in addition to all the features of the 400° model, is equipped with outriggers with automatic leveling function, and an electronic control system (made with CAN-bus technology) that allows it to operate in any position, in fact according to the footprint base, the outriggers position and the load weight, the system measures in real time the best working and safety parameters by means of a thorough diagnostic, allowing total control.
The equipment also includes the new Load
Sensing / Flow Sharing hydraulic distributor and a new rotary joint with integrated rotation sensor.
The capacitive joystick with deadman sensor, accurate and sensitive, allows the turret rotation speed regulation/reduction.
The automatic reversal system of the controls makes it possible to travel with 180° rotated turret, to easily move inside the narrow working areas.
The “Ecowork” system combined with the joystick allows increased fuel savings, drawing power to the Diesel engine only when required.
The already excellent cab comfort features (ROPS -FOPS approved and equipped with all safety devices and air conditioning) are further improved by the adoption of a new Smart Navigation system for controlling the main electronic functions of the vehicle: driving modes, minimum RPM control, forward speed and diagnostics.

  • Both continuous (360°) and non-continuous rotation (400°)
  • Load limiter
  • Outriggers with automatic leveling function
  • Load Sensing / Flow Sharing hydraulic distributor
  • Capacitive joystick with deadman sensor
  • ROPS – FOPS approved cab
  • Smart Navigation System



PIVOT is a compact, lightweight articulated telehandler assembled with high quality components. This wheel loader with articulated chassis and telescopic boom is ideal for working in confined spaces, wherever there is a need for a performing vehicle and with a low operating cost.
The engine (rear) is installed longitudinally for improved access during maintenance, with excellent lateral and rear visibility.
All vital parts, such as the drive shaft and the extension cylinder, are in a protected position, pins and bushings are protected by “Long Life” seal gaskets. The braking system is servo-assisted and the “Inching” pedal allows full control of the forward speed even with the engine at maximum rpm.
Safety and lifting equipment includes a load limiter.
The cab is one of the lowest above ground level in its category and is ROPS – FOPS approved. It is fully equipped with safety devices and designed to guarantee maximum comfort, with openable roof, TFT colour display and capacitive joystick with deadman sensor. It can also be provided with an enhanced climate control system, for perfect air circulation inside the cab.

  • “Inching” pedal control
  • Load limiter
  • “Long Life” seal gaskets
  • ROPS – FOPS approved cab



The Dieci DUMPERS are versatile, easy to handle, lightweight and easy to handle vehicles, with increasing load capacity. Each model has specific characteristics, especially designed for every work requirement.
Vehicles ideal for handling materials on construction sites or in industrial environments, they can be equipped with a self-loading shovel that makes these DUMPERS autonomous in the caisson loading phases.
The central articulated steering provides a tight turning radius, so that it can easily move in construction sites, the vehicle is equipped with freely selectable steering either on the 4 wheels, transverse, or only on 2 wheels.
The roof-rollbar is ROPS – FOPS approved, the cab designed for a high level of comfort is equipped with a reversible driver’s seat.